Regeneation Blower


Regenerative Blower draw air or other gases into the blower unit by impeller blades passing an inlet port.The impeller bleeds then accelerate the air in the outward and forward direction using centrifugal action.

The air is “REGENERATED” by the blower’s annular shaped housing to the base of following blades where it is again hurled outwar(Project Outward).

Every regeneration imparts more pressure to the air when the air reaches a “STRIPPERS” section at the outlet it is stripped from the impeller and diverted out the blower.


  • Film Scrap Collection
  • Bag Filling Equipment
  • Pneumatic Conveying Equipment
  • Fluid Aeration
  • Bulk Material Handling
  • Component Drying
  • Agitation of plating Tank
  • Gas & Oil Burner
  • Automatic Bottling Machine
  • Printing & Packing Machine
  • Medical & Healthcare
  • Industrial Sewing Machine
  • Air Knife
  • Plating Tank Agitation
  • Chip removal
  • Corrugated Box Packers

Salient Features:

  1. Cast Aluminum Impeller & Housing for higher strength
  2. Simple and Robust Design
  3. Oil free Operation eliminates the concern about downstream system contamination.
  4. Low Noise Level
  5. Non Pulsating Air Delivery
  6. Dynamically balanced rotor assembly allows for -No metal contact between impeller blades and side channel assembly which leads to wear & maintenance free blower.
  7. In built silencer and Filter.
  8. Additional Filter System(Optional)